INESCC-DL - Artigos em Revistas Internacionais
URI permanente para esta coleção:
Navegar
Percorrer INESCC-DL - Artigos em Revistas Internacionais por Objetivos de Desenvolvimento Sustentável (ODS) "09:Indústria, Inovação e Infraestruturas"
A mostrar 1 - 10 de 24
Resultados por página
Opções de ordenação
- Autonomous Wireless Sensor with a Low Cost TEG for Application in Automobile VehiclesPublication . Costa, A.; Costa, D.; Morgado, J.; Santos, Helder; Ferreira, Carlos Daniel HenriquesThe present work consists in the development of an autonomous, low cost, reliable, energy scavenger sensor for automotive applications. Thermoelectric generators typically exhibit low efficiency but high reliability, making them suitable for autonomous, low average energy consumption, applications. A prototype sensor was developed for mounting in the engine exhaust pipe using a step-up voltage converter, a microcontroller, temperature and pressure sensing elements, conditioning electronics and a wireless transceiver, all powered by a low cost TEG (Peltier module TEC1-12706), through the scavenging of exhaust gases thermal energy. During the tests the prototype was able to sustain a regular signal transmission throughout the engine operation. The sensor was installed directly at the measuring point eliminating wired cables to hot and vibrating parts, thus, simplifying the installation of components and improving the reliability of the vehicle systems.
- Data Integration in the Brazilian Public Health System for Tuberculosis: Use of the Semantic Web to Establish InteroperabilityPublication . Pellison, Felipe Carvalho; Rijo, Rui Pedro Charters Lopes; Lima, Vinicius Costa; Crepaldi, Nathalia Yukie; Bernardi, Filipe Andrade; Galliez, Rafael Mello; Kritski, Afrânio; Abhishek, Kumar; Alves, DomingosBackground: Interoperability of health information systems is a challenge due to the heterogeneity of existing systems at both the technological and semantic levels of their data. The lack of existing data about interoperability disrupts intra-unit and inter-unit medical operations as well as creates challenges in conducting studies on existing data. The goal is to exchange data while providing the same meaning for data from different sources. Objective: To find ways to solve this challenge, this research paper proposes an interoperability solution for the tuberculosis treatment and follow-up scenario in Brazil using Semantic Web technology supported by an ontology. Methods: The entities of the ontology were allocated under the definitions of Basic Formal Ontology. Brazilian tuberculosis applications were tagged with entities from the resulting ontology. Results: An interoperability layer was developed to retrieve data with the same meaning and in a structured way enabling semantic and functional interoperability. Conclusions: Health professionals could use the data gathered from several data sources to enhance the effectiveness of their actions and decisions, as shown in a practical use case to integrate tuberculosis data in the State of São Paulo.
- Development of CART model for prediction of tuberculosis treatment loss to follow up in the state of São Paulo, Brazil: A case–control studyPublication . Yamaguti, Verena Hokino; Alves, Domingos; Rijo, Rui, Rui Pedro Charters Lopes; Miyoshi, Newton Shydeo Brandão; Ruffino-Netto, AntônioBackground: Tuberculosis is the leading cause of infectious disease-related death, surpassing even the immunodeficiency virus. Treatment loss to follow up and irregular medication use contribute to persistent morbidity and mortality. This increases bacillus drug resistance and has a negative impact on disease control. Objective: This study aims to develop a computational model that predicts the loss to follow up treatment in tuberculosis patients, thereby increasing treatment adherence and cure, reducing efforts regarding treatment relapses and decreasing disease spread. Methods: This is a case-controlled study. Included in the data set were 103,846 tuberculosis cases from the state of São Paulo. They were collected using the TBWEB, an information system used as a tuberculosis treatment monitor, containing samples from 2006 to 2016. This set was later resampled into 6 segments with a 1-1 ratio. This ratio was used to avoid any bias during the model construction. Results: The Classification and Regression Trees were used as the prediction model. Training and test sets accounted for 70% in the former and 30% in the latter of the tuberculosis cases. The model displayed an accuracy of 0.76, F-measure of 0.77, sensitivity of 0.80 and specificity of 0.71. The model emphasizes the relationship between several variables that had been identified in previous studies as related to patient cure or loss to follow up treatment in tuberculosis patients. Conclusion: It was possible to construct a predictive model for loss to follow up treatment in tuberculosis patients using Classification and Regression Trees. Although the fact that the ideal predictive ability was not achieved, it seems reasonable to propose the use of Classification and Regression Trees models to predict likelihood of treatment follow up to support healthcare professionals in minimising the loss to follow up.
- A distributed multiagent system architecture for body area networks applied to healthcare monitoringPublication . Felisberto, Filipe; Laza, Rosalía; Fdez-Riverola, Florentino; Pereira, AntónioIn the last years the area of health monitoring has grown significantly, attracting the attention of both academia and commercial sectors. At the same time, the availability of new biomedical sensors and suitable network protocols has led to the appearance of a new generation of wireless sensor networks, the so-called wireless body area networks. Nowadays, these networks are routinely used for continuous monitoring of vital parameters, movement, and the surrounding environment of people, but the large volume of data generated in different locations represents a major obstacle for the appropriate design, development, and deployment of more elaborated intelligent systems. In this context, we present an open and distributed architecture based on a multiagent system for recognizing human movements, identifying human postures, and detecting harmful activities. The proposed system evolved from a single node for fall detection to a multisensor hardware solution capable of identifying unhampered falls and analyzing the users’ movement. The experiments carried out contemplate two different scenarios and demonstrate the accuracy of our proposal as a real distributed movement monitoring and accident detection system. Moreover, we also characterize its performance, enabling future analyses and comparisons with similar approaches.
- Dynamics parameters estimation of an asynchronous machine plus mechanical shaft set through orbit frequency response analysisPublication . Oliveira, F.; Donsión, M. P.; Peláez, G.This paper presents some of the results obtained upon the experimental study of the behaviour of a prototype mechanical shaft driven by an induction electric machine. The main focus of this paper will be on the mechanical response of the set, based on the measurement of a number of mechanical variables and its integration in well-known mechanical models, allowing a more accurate estimation of the actual parameters of the prototype machine. The results thus obtained can then be used to test the theoretical models, estimate mechanical parameters more accurately and generally increase knowledge on the mechanical response of the prototype set.
- The Effect of a Naturally Ventilated Roof on the Thermal Behaviour of a Building under Mediterranean Summer ConditionsPublication . Ramos, João; Aires, LuisWith the increasing cost associated with energy consumption, climate change and the greater awareness of the population to issues related to energy and environmental efficiency, energy conservation in buildings has been encouraged, along with the development of several solutions based on a more sustainable construction. Building cooling is the most challenging issue in the Mediterranean climate. The roof is one of the main elements of the building’s opaque envelope, where the choice of materials and the implementation of appropriate passive technologies determine the thermal performance of a building. The present work aims to assess the impact of natural ventilation of a roof cavity on the thermal environment of a dwelling house under Mediterranean summer conditions. An experimental study was developed in a small-scale prototype of a typical dwelling house, comprising a ceramic tile roof with vented eaves and insulated sub-tile panels according to the construction solution of the Humbelino Monteiro SA company. The thermal performance of this roof solution was assessed under real climatic conditions based on continuous measurements of the air velocity inside the air gap, the temperature of the air and the surface temperature of all roof layers. Weather conditions were also monitored continuously. Connected with the heat transfer mechanisms, the obtained temperature and air velocity profiles data were analysed and discussed.
- Efficiency in an Intensive Energy Industrial ConsumerPublication . Galvão, J.; Nabais, A.; Galvão, M.; Candeias, J.; Pereira, Thiago; Ramos, J.Energy efficiency actions were made in a glass production industry such as reduction in the energy consumption that will reduce greenhouse gas emissions. All measures were applied regarding European Union-EU guidelines and legislation.
- Energy audit as an input for energy management and energy efficiency improvement in a gypsum manufacturing plantPublication . Bernardo, Hermano; Oliveira, Filipe Tadeu; Serrano, LuisThis paper aims at presenting the main results of an energy audit performed to a gypsum production plant, in Portugal, which due to the amount of energy consumed must comply with the Portuguese program SGCIE (Intensive Energy Consumption Management System). The program was created in 2008 to promote energy efficiency and energy consumption monitoring in intensive energy consuming facilities (energy consumption higher than 500 toe per year). Facilities operators are required to perform energy audits and take actions to draw up an action plan for energy efficiency, establishing targets for energy consumption reduction and greenhouse gases emissions indexes. An energy audit was carried out to identify potential energy conservation measures for improving energy efficiency, and also typical energy consumption patterns, sector/equipment load profiles and thermal equipment performance. This tool gives managers the information to support decision making on improving energy performance and reducing greenhouse gas emissions. A number of tangible targets and measures were devised and set to be implemented in the next few years. Results show that there is a considerable potential for reduction in the energy consumption and greenhouse gases emissions of gypsum manufacturing plants. Here, as elsewhere in the industrial sector, energy efficiency can only be achieved through a continuous energy monitoring and management system.
- Evaluation of soft possibilistic classifications with non-specificity uncertainty measuresPublication . Gonçalves, Luisa M. S.; Fonte, Cidália C.; Júlio, Eduardo N. B. S.; Caetano, MarioThe aim of this paper was to investigate the usefulness of non-specificity uncertainty measures to evaluate soft classifications of remote sensing images. In particular, we analysed whether these measures could be used to identify the difficulties found by the classifier and to estimate the classification accuracy. Two nonspecificity uncertainty measures were considered, the non-specificity measure (NSp) and the U-uncertainty measure, and their behaviour was analysed to evaluate which is the most appropriate for this application. To overcome the fact that these two measures have different ranges, a normalized version (Un) of the U-uncertainty measure was used. Both measures were applied to evaluate the uncertainty of a soft classification of a very high spatial resolution multispectral satellite image, performed with an object-oriented image analysis based on a fuzzy classification. The classification accuracy was evaluated using an error matrix and the user's and producer's accuracies were computed. Two uncertainty indexes are proposed for each measure, and the correlation between the information given by them and the user's and producer's accuracies was determined to assess the relationship and compatibility of both sources of information. The results show that there is a positive correlation between the information given by the uncertainty and accuracy indexes, but mainly between the uncertainty indexes and the user's accuracy, where the correlation achieved 77%. This study shows that uncertainty indexes may be used, along with the possibility distributions, as indicators of the classification performance, and may therefore be very useful tools.
- High Sensitivity Micro-machined Piezoresistive Strain SensorPublication . Caseiro, D.; Santos, S.; Ferreira, Carlos Daniel Henriques; Neves, CarlosThis paper presents a micro-machined piezoresistive sensor capable of measuring very small strains. The sensor design, based on piezoresistive sensing technology, was optimized by the numerical method using Finite Element Method (FEM) to enhance sensibility. The high sensibility is achieved through a reduction of section and through the action of the bending moment. As a result, a sensor with a sensitivity of 569.4608 μV/V/με, which can be fabricated by the SensoNor MultiMEMS process, is proposed. Furthermore, practical essays with macro prototypes confirmed and validated the numerical analysis. Such a sensor can be a direct replacement for the strain gauges and its very high sensitivity opens the door to many other applications, that otherwise would not be possible.
- «
- 1 (current)
- 2
- 3
- »