Percorrer por autor "Pascoal-Faria, Paula"
A mostrar 1 - 10 de 30
Resultados por página
Opções de ordenação
- Additive manufactured Poly("-caprolactone)-graphene scaffolds: Lamellar crystal orientation, mechanical properties and biological performancePublication . Biscaia, Sara; Silva, João C.; Moura, Carla; Viana, Tânia; Tojeira, Ana; Mitchell, Geoffrey R.; Pascoal-Faria, Paula; Ferreira, Frederico Castelo; Alves, NunoUnderstanding the mechano–biological coupling mechanisms of biomaterials for tissue engineering is of major importance to assure proper scaffold performance in situ. Therefore, it is of paramount importance to establish correlations between biomaterials, their processing conditions, and their mechanical behaviour, as well as their biological performance. With this work, it was possible to infer a correlation between the addition of graphene nanoparticles (GPN) in a concentration of 0.25, 0.5, and 0.75% (w/w) (GPN0.25, GPN0.5, and GPN0.75, respectively) in three-dimensional poly("-caprolactone) (PCL)-based scaffolds, the extrusion-based processing parameters, and the lamellar crystal orientation through small-angle X-ray scattering experiments of extruded samples of PCL and PCL/GPN. Results revealed a significant impact on the scaffold’s mechanical properties to a maximum of 0.5% of GPN content, with a significant improvement in the compressive modulus of 59 MPa to 93 MPa. In vitro cell culture experiments showed the scaffold’s ability to support the adhesion and proliferation of L929 fibroblasts (fold increase of 28, 22, 23, and 13 at day 13 (in relation to day 1) for PCL, GPN0.25, GPN0.5, and GPN0.75, respectively) and bone marrow mesenchymal stem/stromal cells (seven-fold increase for all sample groups at day 21 in relation to day 1). Moreover, the cells maintained high viability, regular morphology, and migration capacity in all the different experimental groups, assuring the potential of PCL/GPN scaffolds for tissue engineering (TE) applications.
- Additive manufactured stoneware fired in microwave furnacePublication . Santos, Tiago; Ramani, Melinda; Devesa, Susana; Batista, Catarina; Franco, Margarida; Duarte, Isabel; Costa, Luís; Ferreira, Nelson; Alves, Nuno; Pascoal-Faria, PaulaAdditive manufacturing (AM) techniques have revolutionized the concept of building parts not only in laboratory contexts but also in industry environments and can be applied to distinct fields such as the health, automotive and aeronautics sectors [...]
- Aerodynamics of a wheelchair sprinter racing at the 100m world record pace by CFDPublication . Forte, Pedro; Marinho, Daniel A.; Morais, Jorge E.; Morouço, Pedro; Pascoal-Faria, Paula; Barbosa, Tiago M.The aim of this study was to analyze aerodynamics in a racing position of a wheelchair-racing sprinter, at the world record speed. The athlete and wheelchair were scanned at the beginning of the propulsive phase position (hands near the handrims at 12h) for the 3D model acquisition. Numerical simulation was run on Fluent, having as output the pressure, viscosity and total drag force, and respective coefficients of drag at the world record speed in T-52 category. Total drag was 7.56N and coefficient of drag was 1.65. This work helped on getting a deeper insight about the aerodynamic profile of a wheelchair-racing athlete, at a 100m world record speed.
- Biomechanical Outcomes Related with Gait in Children with Cerebral Palsy Using Ankle-Foot Orthotic - A Systematic ReviewPublication . Gordo, Jessica Jorge; Pascoal-Faria, Paula; Mateus, Artur; Morouço, Pedro; Schiriati, Verónica; Sandra, AmadoGait in children with cerebral palsy (CP) is often affected by motor impairments which limit the patient's ability to walk. To improve gait and reduce walking limitations, children with CP need to use ankle foot orthoses. An orthosis is an externally applied device that is designed and fitted to the body to achieve one or more of the following goals: a) Control biomechanical alignment. b) Correct or accommodate deformity, and 3) Protect and support an injury. This systematic review aims to describe research evidence supporting the use of ankle-foot orthoses to improve gait biomechanical outcomes among individuals with CP. Literature search was pursued from PubMed database. Studies were included if (1) they evaluated an outcome measure related with gait using ankle-foot orthotic (AFO) in children (2) considered children with a diagnosis of CP and have a (3) GMFCS classification of I, II or III. Papers were excluded if they evaluated (1) other population besides CP, (2) the use of orthoses other than AFOs and (3) gait analysis procedure was not presented. All the included studies have analyzed spatiotemporal parameters, the step length (m), stride length (m) and cadence (steps/minute) were the most frequently reported. Our findings showed that several studies have investigated the effects of AFOs, all of which have reported positive influences on at least one gait parameter, as well as positive changes in joint kinematics and kinetic in children with CP.
- Biomechanics modeling for functional analysis: Sheep modelPublication . Silva, Rui; Amado, Sandra; João, Filipa; Morouço, Pedro; Pascoal-Faria, Paula; Alves, Nuno; Veloso, AntónioThe aim of the present manuscript was to provide information on the suitability of using ovine as models for conducting in vivo bone tissue engineering studies, regarding the biomechanical considerations. Despite the need of knowledge of the animal model used for bone tissue research a good planning and study design is equal important. The purpose of this review is to contribute to extrapolation of reliable data for those who pretend to use the ovine model in tissue engineering and regenerative medicine.
- Comparing different electrode configurations using the 10-10 international system in tDCS: A finite element model analysisPublication . Faria, Paula; Leal, A.; Miranda, P.C.; Pascoal-Faria, Paula;For the past few years, the potential of transcranial direct current stimulation (tDCS) for the treatment of several pathologies has been investigated. Knowledge of the current density distribution is an important factor in optimizing such applications of tDCS. We use the finite element method to compare three different models in tDCS, where the stimulation electrodes (EEG electrodes) are placed in the 10-10 international system coordinates. We studied the focality and the distribution of the current density in depth and at the surface of the brain for three different electrode configurations. We show that the use of EEG electrodes increases the focality of tDCS, especially when one cathode and several anodes are used. Additionally, these electrodes need less injected current, can be placed at scalp positions whose relationship with the underlying cerebral cortex are known and allow the use of tDCS and EEG recording concomitantly.
- Comprehensive review on full bone regeneration through 3D printing approachesPublication . Fernandes, Cristiana; Moura, Carla; Ascenso, Rita M.T.; Amado, Sandra; Alves, Nuno; Pascoal-Faria, PaulaOver the last decades, the number of work accidents associated with bone fractures has increased leading to a growing concern worldwide. Currently, autografts, allografts, and xenografts are used for bone regeneration. However, their application has associated risks. Tissue engineering (TE) has brought solutions to address these problems, through the production of temporary supports, providing mechanical support to the formation of new bone tissue and biocompatible and biodegradable scaffolds, which allow cell adhesion and proliferation to ensure bone formation. The combination of materials and structure with the technique to be used will directly influence their physical and chemical properties and, consequently, their action in contributing to bone regeneration. Thus, the focus of this chapter is to perform an exhaustive literature review and a critical analysis of the state of the art in bone TE and present a proposal of an optimized temporary support geometry for bone regeneration in case of large bone defects. For this, it was listed and identified the best choice of biomaterials, fabrication method, cell type and their culture conditions (static vs. dynamic), and/or the inclusion of growth factors for the repair of large bone defects.
- A Computer Tool for 3D Shape Recovery of FruitsPublication . Gaspar, Miguel; Pascoal-Faria, Paula; Amado, Sandra; Alves, NunoCharacterizing a fruit’s mechanical behavior is an important step towards reducing economic losses due to bruising. Several 3D scanning technologies allow to obtain the external geometry of a fruit, but no easily accessible tools exist for the acquisition of the geometry of internal structures such as the core. We propose a low-cost destructive method for tomographic reconstruction of a fruit from scanned slices. A method for overcoming the difficulties in registering the different images is also presented.
- Computer-aided optimization in additive manufacturing: Processing parameters and 3D scaffold reconstructionPublication . Alves, Nuno; Gaspar, Miguel Belbut; Pascoal-Faria, PaulaScaffolds are implantable bio-absorbable systems capable of regenerating osteoporotic bone or other native tissues. Additive Manufacturing processes are used to produce scaffolds with customized external shape and predefined internal morphology, allowing some control over pore size and distribution. Despite significant advances in Additive Manufacturing processes, the experimental optimization of processing parameters is time-consuming and expensive usually generating biomaterials waste. Moreover, the manufacturing of such polymeric or hybrid scaffolds requires time-consuming human supervision procedures. Subsequently, measurements of the scaffold’s architecture such as filament diameter, distance between two consecutive filaments, pore geometry and size, and total porosity are usually performed using computer tomography or microscopy, which also requires significant human and physical resources. This research work intends to overcome some aforementioned limitations through the development of a novel approach based on in-situ computer-aided optimization of the extrusion-based processing parameters.
- Effects of Scaffold Electrical Properties on Electric Field Delivery in BioreactorsPublication . Meneses, João; Fernandes, Sofia R.; Alves, Nuno; Pascoal-Faria, Paula; Miranda, Pedro CavaleiroIn tissue engineering, cell culture scaffolds have been widely used in combination with electrical stimulation to promote multiple cellular outcomes, like differentiation and proliferation. Nevertheless, the influence of scaffolds on the electric field delivered inside a bioreactor is often ignored and requires a deeper study. By performing numerical analysis in a capacitively coupled setup, this work aimed to predict the effects of the scaffold presence on the electric field, considering multiple combinations of scaffold and culture medium electrical properties. We concluded that the effect of the scaffold on the electric field in the surrounding culture medium was determined by the difference in electrical conductivity of these two materials. The numerical simulations pointed to significant variations in local electric field patterns, which could lead to different cellular outcomes and confound the interpretation of the experimental results.
- «
- 1 (current)
- 2
- 3
- »