Centre for Rapid and Sustainable Product Development

Funder

Organizational Unit

Publications

Composite Central Face Design—An Approach to Achieve Efficient Alginate Microcarriers

Publication . Valente, J.F.A.; Dias, J.R.; Sousa, A.; Alves, N.

Microparticulated drug delivery systems have been used as promising encapsulation systems for protecting drugs for in vitro and in vivo applications, enhancing its stability, providing an increased surface to volume ratio, reducing adverse effects, and hence an improvement in bioavailability. Among the studied microparticles, there is a rising interest in the research of alginate microparticles for pharmaceutical and biomedical fields confirming its potential to be used as an effective matrix for drug and cell delivery. Moreover, calcium alginate has been one of the most extensively forming microparticles in the presence of divalent cations providing prolonged drug release and suitable mucoadhesive properties. Regarding the above mentioned, in this research work, we intended to produce Ca-alginate micro-vehicles through electrospraying, presenting high encapsulation efficiency (EE%), reduced protein release across the time, reduced swelling effect, and high sphericity coefficient. To quickly achieve these characteristics and to perform an optimal combination among the percentage of alginate and CaCl2, design of Experiments was applied. The obtained model presented to be statistically significant (p-value < 0.05), with a coefficient of determination of 0.9207, 0.9197, 0.9499, and 0.9637 for each output (EE%, release, swelling, and sphericity, respectively). Moreover, the optimal point (4% of alginate and 6.6% of CaCl2) was successfully validated.

2019-11Journal article

Open access

Personalized reusable face masks with smart nano-assisted destruction of pathogens for COVID-19: A visionary road

Publication . De Sio, Luciano; Ding, Bin; Focsan, Monica; Kogermann, Karin; Pascoal-Faria, Paula; Petronela, Francesca; Mitchell, Geoffrey; Zussman, Eyal; Pierini, Filippo

The Coronavirus disease 2019 (COVID-19) emergency has demonstrated that the utilization of face masks plays a critical role in limiting the outbreak. Healthcare professionals utilize masks all day long without replacing them very frequently, thus representing a source of crossinfection for patients and themselves. Nanotechnology is a powerful tool with the capability to produce nanomaterials with unique physicochemical and antipathogen properties. Here, how to realize non-disposable and highly comfortable respirators with light-triggered self-disinfection ability by bridging bioactive nanofiber properties and stimuli-responsive nanomaterials is outlined. The visionary road highlighted in this Concept is based on the possibility of developing a new generation of masks based on multifunctional membranes where the presence of nanoclusters and plasmonic nanoparticles arranged in a hierarchical structure enables the realization of a chemically driven and on-demand antipathogen activities. Multilayer electrospun membranes have the ability to dissipate humidity present within the mask, enhancing the wearability and usability. The photothermal disinfected membrane is the core of these 3D printed and reusable masks with moisture pump capability. Personalized face masks with smart nano-assisted destruction of pathogens will bring enormous advantages to the entire global community, especially for front-line personnel, and will open up great opportunities for innovative medical applications.

2021Journal article

Restricted access

The use of scattering data in the study of the molecular organisation of polymers in the non-crystalline state

Publication . Gkourmpis, Thomas; Mitchell, Geoffrey R.

Scattering data for polymers in the non-crystalline state, i.e., the glassy state or the molten state, may appear to contain little information. In this work, we review recent developments in the use of scattering data to evaluate in a quantitative manner the molecular organization of such polymer systems. The focus is on the local structure of chain segments, on the details of the chain conformation and on the imprint the inherent chemical connectivity has on this structure. We show the value of tightly coupling the scattering data to atomistic-level computer models. We show how quantitative information about the details of the chain conformation can be obtained directly using a model built from definitions of relatively few parameters. We show how scattering data may be supplemented with data from specific deuteration sites and used to obtain information hidden in the data. Finally, we show how we can exploit the reverse Monte Carlo approach to use the data to drive the convergence of the scattering calculated from a 3d atomistic-level model with the experimental data. We highlight the importance of the quality of the scattering data and the value in using broad Q scattering data obtained using neutrons. We illustrate these various methods with results drawn from a diverse range of polymers.

2020Journal article

Open access

Green nanocomposites from rosin-limonene copolymer and algerian clay

Publication . Derdar, Hodhaifa; Mitchell, Geoffrey; Mahendra, Vidhura; Benachour, Mohamed; Haoue, Sara; Cherifi, Zakaria; Bachari, Khaldoun; Harrane, Amine; Meghabar, Rachid

Green nanocomposites from rosin-limonene (Ros-Lim) copolymers based on Algerian organophilic-clay named Maghnite-CTA+ (Mag-CTA+) were prepared by in-situ polymerization using di erent amounts (1, 5 and 10% by weight) of Mag-CTA+ and azobisisobutyronitrile as a catalyst. The Mag-CTA+ is an organophilic montmorillonite silicate clay prepared through a direct exchange process; the clay was modified by ultrasonic-assisted method using cetyltrimethylammonuim bromide in which it used as green nano-filler.The preparation method of nanocomposites was studied in order to determine and improve structural, morphological, mechanical and thermal properties ofsin.The structure and morphology of the obtained nanocomposites(Ros-Lim/Mag-CTA+) were determined using Fourier transform infrared spectroscopy, X-ray di raction, scanning electronic microscopy and transmission electronic microscopy. The analyses confirmed the chemical modification of clay layers and the intercalation of rosin-limonene copolymer within the organophilic-clay sheets. An exfoliated structure was obtained for the lower amount of clay (1% wt of Mag-CTA+), while intercalated structures were detected for high amounts of clay (5 and 10% wt of Mag-CTA+). The thermal properties of the nanocomposites were studied by thermogravimetric analysis (TGA) and show a significant improvement inthe thermal stability of the obtained nanocomposites compared to the purerosin-limonene copolymer (a degradation temperature up to 280ºC).

2020-08-30Journal article

Open access

Optimization of phycobiliprotein pigments extraction from red algae Gracilaria gracilis for substitution of synthetic food colorants

Publication . Pereira, Tatiana; Barroso, Sónia; Mendes, Susana; Amaral, Renata A.; Dias, Juliana R.; Baptista, Teresa; Saraiva, Jorge A.; Alves, Nuno; Gil, Maria M.

The extraction of phycobiliprotein (PBP) pigments from red algae Gracilaria gracilis was optimized using maceration, ultrasound-assisted extraction (ultrasonic water bath and ultrasonic probe), high pressure-assisted extraction, and freeze-thaw. The experimental conditions, namely homogenization time (t1), buffer concentration (C), treatment time (t2), biomass: buffer ratio (R), and pressure (P), were optimized using Response Surface Methodology (RSM). The yield of phycoerythrin (PE) extracted, determined spectroscopically, was used as the response variable. Maceration was the most efficient extraction method yielding 3.6 mg PE/g biomass under the optimal conditions (t1 = t2 = 10 min; C = 0.1 M; R = 1:50). Scanning Electron Microscopy (SEM) analysis of the biomass before and after the cell disruption treatments revealed a more efficient cell wall rupture with maceration.

2020Journal article

Restricted access