Percorrer por autor "Ramos, Carina"
A mostrar 1 - 2 de 2
Resultados por página
Opções de ordenação
- Optimalmould - part II: Global optimization of the injection moulding cycle timePublication . Ramos, Carina; Carreira, Pedro; Bartolo, Paulo; Alves, NunoThe time required to produce a plastic part is a key issue in injection moulding process as it strongly determine the cost per part. Several approaches have been proposed to address this problem. However they do not cover all aspects related to the complete cycle time of the injection moulding process, only focusing on steps such as filling time, cooling time and packing time. This paper presents a global optimisation strategy for the injection moulding cycle time, covering all time steps related to the injection moulding process, including a novel mathematical model to predict the ejection time. An industrial case study was considered to validate the proposed approach. The obtained results are very close to the experimental ones. © 2012 American Institute of Physics.
- Optimalmould-part I: Multi-objective optimization to moulds design for injection of polymersPublication . Ramos, Carina; Carreira, P.; Bártolo, Paulo; Alves, NunoThe problem of mould design optimisation for polymer injection is a key issue for both mouldmaking and polymer injection industries. Several computational tools have proposed to address this problem. However they do not cover all aspects related to both mould design and injection moulding process, usually requiring the geometrical configuration of the initial mould solution. This paper presents a novel multi-objective optimisation tool, integrating CAD and CAE tools to optimise mould design parameters and injection moulding process parameters. No initial geometric definition of the mould is required. An industrial case study was considered to validate the proposed approach and the performance of several optimisation algorithms evaluated.