Percorrer por autor "Oliveira, Arnaldo S. R."
A mostrar 1 - 2 de 2
Resultados por página
Opções de ordenação
- Active reflection coefficients characterization system for multiple input multiple output antennasPublication . Jordão, Marina; Belo, Daniel; Caldeirinha, Rafael F. S.; Oliveira, Arnaldo S. R.; Carvalho, Nuno B.The main objective of this study is to present a characterization system that can be used to measure the active reflection coefficient of each port of the multiple input multiple output (MIMO) antennas, when the main beam is steered to an intended direction. Since MIMO systems are composed of antennas with several elements and each antenna element is connected to a power amplifier, an active component, the beamforming will contribute to the mismatch of each branch. To this extent, a calibrated measurement system has been implemented using off-the-shelf software defined radio and designed to effectively extract such coefficients, when all the ports are simultaneously excited. Results for linear and planar MIMO antenna arrays have been experimentally obtained for several beam directions and the impact of beamforming on each element of the antenna is presented and compared to simulated results. Additionally, their behaviour was also assessed when some of the radiation elements are deliberately disconnected, mimicking those not working properly.
- A Survey on Over-The-Air Linearization Methods for MIMO SystemsPublication . Jordão, Marina; Caldeirinha, Rafael; Oliveira, Arnaldo S. R.; Carvalho, Nuno BorgesTransmitter antenna arrays are typically coupled to several RF chains, which imposes stringent requirements on the linearization of each power amplifier (PA) present in the system. For this and other reasons discussed in this work, Over-the-air (OTA) linearization methods are considered to linearize transmitter antenna arrays in 5G scenarios. However, several factors need to be considered when applying OTA linearization methods. In this paper, an extended critical review of validated OTA linearization methods is presented. The main goal is to point out and discuss the most prominent methods, in order to determine which one is the most suitable for a specific application. In particular, analysis for each method is performed and, subsequently, their benefits and the disadvantages are systematically discussed. This is sought to fill-in a gap in the scientific literarure and, thus, to help radio-frequency engineers in the implementation of OTA digital pre-distortion (DPD) techniques for multiple input multiple output (MIMO) systems.