Browsing by Author "Sánchez, Manuel García"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
- Dual-Band Single-Layer Fractal Frequency Selective Surface for 5G ApplicationsPublication . Decoster, Bram; Maes, Stephanie; Cuiñas, Iñigo; Sánchez, Manuel García; Caldeirinha, Rafael; Verhaevert, JoDue to the global growth in popularity of Fifth Generation (5G) cellular communications, the demand for shielding against it has risen for a variety of applications, mainly related to cyber-security but also to isolation, calm areas and so on. This research paper aims to provide a suitable dual-band fractal FSS (Frequency Selective Surface) for the 5G lower band frequencies: 750 MHz and 3.5 GHz. The unit cell is in the shape of a bow tie, where each of the triangular parts are Sierpiński triangles. One major addition to the unit cell is a central metal strip to make the manufacturing of the FSS more feasible and to tune the operation frequencies and bandwidths. As with each different stage of a fractal antenna, the different stages of the fractal FSS design behave differently. For this application, stage 2 is sufficient, as we are able to cover frequency bands among those included in the FR1 5G spectrum. Some equations were derived using linear regression in order to provide specific design tools for building an FSS. These equations have high accuracy and can be used to adapt the proposed design to other frequencies. Some other parameters, which are not represented in the aforementioned equations, can also be adjusted for minor tweaking of the final design. This design performs well except under large incidence angles. This should be taken into account when proposing the installation of a structure based on it. A good agreement between simulation and measurement results is observed.
- Input parameter extraction method for point scatterer formulation in vegetation media at millimetre-wave frequenciesPublication . Leonor, Nuno R.; Caldeirinha, Rafael F. S.; Sánchez, Manuel García; Fernandes, TelmoAn empirical method to extract the relevant point scatterer formulation input parameters for appropriate radio coverage simulation in vegetation areas, is proposed. While the original propagation model would require the prior knowledge of the complete tree(s) re-radiation function(s) to extract the relevant propagation input parameters, the empirical method proposed herein is based only on two simple measurements. Re-radiation measurements of several specimens of Thuja pelicata and Ficus benjamina trees at two frequencies have been used to validate the proposed simplified extraction method. The proposed empirical model was then used to characterise the propagation phenomena of various trees arranged in four different scenarios. Subsequently, directional spectra measurements performed inside an anechoic chamber at both 20 and 62.4 GHz were used to assess the empirical model performance, while predicting the received signal level arriving from various directions. A relatively good overall model performance when applied to tree formations was obtained which, coupled with the simplified parameter extraction proposed, makes it suitable to be integrated in commercial simulation platforms and/or as input data to other propagation models that may require the prior knowledge of the individual tree re-radiation functions.