Browsing by Author "Alves, Nuno"
Now showing 1 - 10 of 58
Results Per Page
Sort Options
- 316L stainless steel mechanical and tribological behavior—A comparison between selective laser melting, hot pressing and conventional castingPublication . Bartolomeu, F.; Buciumeanu, M.; Pinto, E.; Alves, Nuno; Carvalho, O.; Silva, F: S.; Miranda, G.This work presents a comprehensive study on the influence of three different processing technologies (Selective Laser Melting, Hot Pressing and conventional casting) on the microstructure, mechanical and wear behavior of an austenitic 316L Stainless Steel.Acorrelation between the processing technologies,the obtained microstructure and the mechanical and wear behavior was achieved. The results showed that the highest mechanical properties and tribological performance were obtained for 316L SS specimens produced by Selective Laser Melting, when compared to Hot Pressing and conventional casting. The high wear and mechanical performance of 316L Stainless Steel fabricated by Selective Laser Melting are mainly due to the finer microstructure, induced by the process. In this sense, Selective Laser Melting seems a promising method to fabricate customized 316L SS implants with improved mechanical and wear performance
- 3D printed poly(E-caprolactone)/Hydroxyapatite scaffolds for bone tissue engineering: A comparative study on a Composite Preparation by Melt blending or solvent casting techniques and the influence of bioceramic content on scaffold propertiesPublication . Biscaia, Sara; Branquinho, Mariana V.; Alvites, Rui D.; Fonseca, Rita; Sousa, Ana Catarina; Pedrosa, Sílvia Santos; Caseiro, Ana R.; Guedes, Fernando; Patrício, Tatiana; Viana, Tânia; Mateus, Artur; Maurício, Ana C.; Alves, NunoBone tissue engineering has been developed in the past decades, with the engineering of bone substitutes on the vanguard of this regenerative approach. Polycaprolactone-based scaffolds are fairly applied for bone regeneration, and several composites have been incorporated so as to improve the scaffolds’ mechanical properties and tissue in-growth. In this study, hydroxyapatite is incorporated on polycaprolactone-based scaffolds at two different proportions, 80:20 and 60:40. Scaffolds are produced with two different blending methods, solvent casting and melt blending. The prepared composites are 3D printed through an extrusion-based technique and further investigated with regard to their chemical, thermal, morphological, and mechanical characteristics. In vitro cytocompatibility and osteogenic differentiation was also assessed with human dental pulp stem/stromal cells. The results show the melt-blending-derived scaffolds to present more promising mechanical properties, along with the incorporation of hydroxyapatite. The latter is also related to an increase in osteogenic activity and promotion. Overall, this study suggests polycaprolactone/hydroxyapatite scaffolds to be promising candidates for bone tissue engineering, particularly when produced by the MB method.
- 3D-printed teeth in endodontics: Why, how, problems and future: A narrative reviewPublication . Reis, Tiago; Barbosa, Cláudia; Franco, Margarida; Baptista, Catarina; Alves, Nuno; Castelo-Baz, Pablo; Martín-Cruces, José; Martin-Biedma, BenjaminThree-dimensional printing offers possibilities for the development of new models in endodontics. Numerous studies have used 3D-printed teeth; however, protocols for the standardization of studies still need to be developed. Another problem with 3D-printed teeth is the different areas of literature requested to understand the processes. This review aims to gather evidence about 3Dprinted teeth on the following aspects: (1) why they are advantageous; (2) how they are manufactured; (3) problems they present; and (4) future research topics. Natural teeth are still the standard practice in ex vivo studies and pre-clinical courses, but they have several drawbacks. Printed teeth may overcome all limitations of natural teeth. Printing technology relies on 3D data and post-processing tools to form a 3D model, ultimately generating a prototype using 3D printers. The major concerns with 3D-printed teeth are the resin hardness and printing accuracy of the canal anatomy. Guidance is presented for future studies to solve the problems of 3D-printed teeth and develop well-established protocols, for the standardization of methods to be achieved. In the future, 3D-printed teeth have the possibility to become the gold standard in ex vivo studies and endodontic training.
- 45S5 BAG-Ti6Al4V structures: The influence of the design on some of the physical and chemical interactions that drive cellular responsePublication . Melo-Fonseca, F.; Lima, R.; Costa, M.M.; Bartolomeu, F.; Alves, Nuno; Miranda, A.; Gasik, M.; Silva, F.S.; Silva, N.A.; Miranda, G.Multi-material Ti6Al4V cellular structures impregnated with 45S5 bioactive glass were designed and produced using Selective LaserMelting (SLM), an additive manufacturing technique, combinedwith Press and Sintering focusing on load bearing components like hip implants. These structures were designed to combine Ti6Al4V mechanical properties and promote bone ingrowth into the structure as the bioactive material (45S5) is being absorbed and replaced by newly formed bone. The influence of these structures design on some of the physical and chemical aspects that drive cellular response was assessed. Roughness, wettability, bioactive glass quantity and quality on the structures after processing and the pH measured during cell culture (as a consequence of bioactive glass dissolution) were evaluated and correlated with cellular viability, cellular distribution, morphology and proliferation on the surface and inside the structures.
- Additive manufactured Poly("-caprolactone)-graphene scaffolds: Lamellar crystal orientation, mechanical properties and biological performancePublication . Biscaia, Sara; Silva, João C.; Moura, Carla; Viana, Tânia; Tojeira, Ana; Mitchell, Geoffrey R.; Pascoal-Faria, Paula; Ferreira, Frederico Castelo; Alves, NunoUnderstanding the mechano–biological coupling mechanisms of biomaterials for tissue engineering is of major importance to assure proper scaffold performance in situ. Therefore, it is of paramount importance to establish correlations between biomaterials, their processing conditions, and their mechanical behaviour, as well as their biological performance. With this work, it was possible to infer a correlation between the addition of graphene nanoparticles (GPN) in a concentration of 0.25, 0.5, and 0.75% (w/w) (GPN0.25, GPN0.5, and GPN0.75, respectively) in three-dimensional poly("-caprolactone) (PCL)-based scaffolds, the extrusion-based processing parameters, and the lamellar crystal orientation through small-angle X-ray scattering experiments of extruded samples of PCL and PCL/GPN. Results revealed a significant impact on the scaffold’s mechanical properties to a maximum of 0.5% of GPN content, with a significant improvement in the compressive modulus of 59 MPa to 93 MPa. In vitro cell culture experiments showed the scaffold’s ability to support the adhesion and proliferation of L929 fibroblasts (fold increase of 28, 22, 23, and 13 at day 13 (in relation to day 1) for PCL, GPN0.25, GPN0.5, and GPN0.75, respectively) and bone marrow mesenchymal stem/stromal cells (seven-fold increase for all sample groups at day 21 in relation to day 1). Moreover, the cells maintained high viability, regular morphology, and migration capacity in all the different experimental groups, assuring the potential of PCL/GPN scaffolds for tissue engineering (TE) applications.
- Additive manufactured stoneware fired in microwave furnacePublication . Santos, Tiago; Ramani, Melinda; Devesa, Susana; Batista, Catarina; Franco, Margarida; Duarte, Isabel; Costa, Luís; Ferreira, Nelson; Alves, Nuno; Pascoal-Faria, PaulaAdditive manufacturing (AM) techniques have revolutionized the concept of building parts not only in laboratory contexts but also in industry environments and can be applied to distinct fields such as the health, automotive and aeronautics sectors [...]
- Advanced face mask filters based on PCL electrospun meshes dopped with antimicrobial MgO and CuO nanoparticlesPublication . Ferreira, Carolina A. M.; Guerreiro, Sara F.C.; Valente, Joana F. A.; Patrício, Tatiana M.F.; Alves, Nuno; Mateus, Artur; Dias, Juliana R.The pandemic situation caused by coronavirus clearly demonstrated the need for alternatives able to protect the respiratory tract and inactivate the infectious agents. Based on this, antibacterial face-mask filters of polycaprolactone (PCL) dopped with magnesium oxide (MgO) and copper oxide (CuO) nanoparticles (NPs) were produced using an electrospinning technique. A morphological analysis of electrospun meshes evaluated the success of nanoparticles’ incorporation as well as the average fibers’ diameters (481 +- 272 nm). The performance of electrospun nanofibers was also assessed in terms of tensile strength (0.88 +- 0.25 MPa), water vapor permeability (11,178.66 +- 35.78 g.m-2.day-1), stability under wet conditions and antibacterial activity according to the standard guidelines. The filters showed structural stability up to 2 h of washing and improved antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) for optimized concentrations of MgO and CuO NPs. Overall, electrospun meshes with antibacterial activity were successfully developed for advanced filtering applications.
- Bioengineered Temporomandibular Joint Disk Implants: Study Protocol for a Two-Phase Exploratory Randomized Preclinical Pilot Trial in 18 Black Merino Sheep (TEMPOJIMS)Publication . Ângelo, David Faustino; Monje, Florencio Gil; González-García, Raúl; Little, Christopher B; Mónico, Lisete; Pinho, Mário; Santos, Fábio Abade; Carrapiço, Belmira; Gonçalves, Sandra Cavaco; Morouço, Pedro; Alves, Nuno; Moura, Carla; Wang, Yadong; Jeffries, Eric; Gao, Jin; Sousa, Rita; Neto, Lia Lucas; Caldeira, Daniel; Salvado, FranciscoBackground: Preclinical trials are essential to test efficacious options to substitute the temporomandibular joint (TMJ) disk. The contemporary absence of an ideal treatment for patients with severe TMJ disorders can be related to difficulties concerning the appropriate study design to conduct preclinical trials in the TMJ field. These difficulties can be associated with the use of heterogeneous animal models, the use of the contralateral TMJ as control, the absence of rigorous randomized controlled preclinical trials with blinded outcomes assessors, and difficulties involving multidisciplinary teams. Objective: This study aims to develop a new, reproducible, and effective study design for preclinical research in the TMJ domain, obtaining rigorous data related to (1) identify the impact of bilateral discectomy in black Merino sheep, (2) identify the impact of bilateral discopexy in black Merino sheep, and (3) identify the impact of three different bioengineering TMJ discs in black Merino sheep. Methods: A two-phase exploratory randomized controlled preclinical trial with blinded outcomes is proposed. In the first phase, nine sheep are randomized into three different surgical bilateral procedures: bilateral discectomy, bilateral discopexy, and sham surgery. In the second phase, nine sheep are randomized to bilaterally test three different TMJ bioengineering disk implants. The primary outcome is the histological gradation of TMJ. Secondary outcomes are imaging changes, absolute masticatory time, ruminant time per cycle, ruminant kinetics, ruminant area, and sheep weight Results: Previous preclinical studies in this field have used the contralateral unoperated side as a control, different animal models ranging from mice to a canine model, with nonrandomized, nonblinded and uncontrolled study designs and limited outcomes measures. The main goal of this exploratory preclinical protocol is to set a new standard for future preclinical trials in oromaxillofacial surgery, particularly in the TMJ field, by proposing a rigorous design in black Merino sheep. The authors also intend to test the feasibility of pilot outcomes. The authors expect to increase the quality of further studies in this field and to progress in future treatment options for patients undergoing surgery for TMJ disk replacement. Conclusions: The study has commenced, but it is too early to provide results or conclusions.
- Biological Treatments for Temporomandibular Joint Disc Disorders: Strategies in Tissue EngineeringPublication . Trindade, Daniela; Cordeiro, Rachel; José, Henrique Cardoso; DF, Angelo; Alves, Nuno; Moura, CarlaThe temporomandibular joint (TMJ) is an important structure for the masticatory system and the pathologies associated with it affect a large part of the population and impair people’s lifestyle. It comprises an articular disc, that presents low regeneration capacities and the existing clinical options for repairing it are not effective. This way, it is imperative to achieve a permanent solution to guarantee a good quality of life for people who suffer from these pathologies. Complete knowledge of the unique characteristics of the disc will make it easier to achieve a successful tissue engineering (TE) construct. Thus, the search for an effective, safe and lasting solution has already started, including materials that replace the disc, is currently growing. The search for a solution based on TE approaches, which involve regenerating the disc. The present work revises the TMJ disc characteristics and its associated diseases. The different materials used for a total disc replacement are presented, highlighting the TE area. A special focus on future trends in the field and part of the solution for the TMJ problems described in this review will involve the development of a promising engineered disc approach through the use of decellularized extracellular matrices.
- Biomechanics modeling for functional analysis: Sheep modelPublication . Silva, Rui; Amado, Sandra; João, Filipa; Morouço, Pedro; Pascoal-Faria, Paula; Alves, Nuno; Veloso, AntónioThe aim of the present manuscript was to provide information on the suitability of using ovine as models for conducting in vivo bone tissue engineering studies, regarding the biomechanical considerations. Despite the need of knowledge of the animal model used for bone tissue research a good planning and study design is equal important. The purpose of this review is to contribute to extrapolation of reliable data for those who pretend to use the ovine model in tissue engineering and regenerative medicine.