A carregar...
Publicação
Effect of water and fiber length on the mechanical properties of polypropylene matrix composites
| Nome: | Descrição: | Tamanho: | Formato: | |
|---|---|---|---|---|
| 302.77 KB | Adobe PDF |
Orientador(es)
Resumo(s)
This paper presents the results of a current study on polypropylene matrix composites processed by injection, with two different glass fiber lengths and five different volume fractions. Physical and mechanical properties were obtained, namely flexural strength, stiffness modulus and fracture toughness. The mechanical properties of the composites increased significantly with the increase of the fibers volume fraction in agreement with the Counto model. The effect of water immersion time was also analysed. Immersion in water promotes a marked decrease in mechanical properties in the early seven-ten days, and afterwards tends to stabilize. Water causes a decrease of the relative strength which increases with fiber volume fraction and reaches about 29 % and 32 % for 20 % of 4.5 mm fiber length and for 25 % of 12 mm fiber length respectively, after 28 days immersion in water. Fracture toughness increases with fiber volume fraction and is always higher for 12 mm fiber length composites than for 4.5 mm fiber length composites.
Descrição
Palavras-chave
Glass fibers Mechanical properties Short fibers Thermoplastic composites
Contexto Educativo
Citação
Ferreira, N., Capela, C., Ferreira, J. M., & Costa, J. M. (2014). Effect of Water and Fiber Length on the Mechanical Properties of Polypropylene Matrix Composites. Fibers and Polymers, 15(5), 1017-1022. https://doi.org/10.1007/s12221-014-1017-y
Editora
Springer Nature
Licença CC
Sem licença CC