Loading...
1 results
Search Results
Now showing 1 - 1 of 1
- Study on the fatigue strength of AA 6082-T6 adhesive lap jointsPublication . Pereira, António; Ferreira, J.M.; Antunes, F.V.; Bartolo, PauloA research study on the fatigue behaviour of aluminium alloy adhesive lap joints was carried out to understand the effect of surface pre-treatment and adherends thickness on the fatigue strength of adhesive joints. The adherend material used for the experimental tests was an aluminium alloy 6082-T6 in the form of thin sheets, and the adhesive used was a high strength epoxy (Araldite 420 A/B). The surface preparation included an abrasive preparation (AP joints) and sodium dichromate-sulphuric acid etch (CSA joints). A maximum fatigue strength was obtained for the CSA surface treatment with a 1.0 mm adherends' thickness. The fastest fatigue damage was related with a high surface roughness and a high stress perpendicular to adhesive surface, which helps to promote the adhesive failure. A numerical analysis was also performed to understand the effect of the adherends thickness on the stress level. Results showed an increase of the out-of-plane peak stresses with the increase of adherends thickness.